Runoff estimation in southern Brazil based on Smith's modified model and the Curve Number method

The objective of this work was to measure and model the runoff for different soils classes at different rainfall intensities (30, 60 and 120 mm h⁻¹) in Southern Brazil. A portable rainfall simulator with multiple nozzles was used to simulate these rainfall intensities. For each soil, the initial time and runoff rate, rainfall characteristics (total, duration and intensities), surface slope, crop residue amount and cover percentage, soil densities (bulk and particle), soil porosity (bulk, macro and micro), textural fractions (clay, silt and sand), and the initial and saturated soil water content were measured. The runoff measured was compared to Smith's modified and Curve Number (USDA-SCS) models. The cumulative runoff losses were 67, 45 and 27% of the total rainfall, for a Rhodic Paleudalf, Typic Quartzipsamment and Rhodic Hapludox, respectively. An inverse relationship was observed between initial runoff and the runoff rate, independently of the soil surface and rainfall conditions. Increasing rainfall intensity decreased the time to runoff and increased runoff rate. The Smith's modified model overestimated the cumulative runoff by about 4%. The Smith's modified model presented a better estimate for both higher and lower rainfall intensities (120 and 30 mm h⁻¹). The SCS Curve Number model overestimated the cumulative runoff by about 34%. This large overestimate is probably due to that the model did not take into account the soil tillage system used in the field by farmers, particularly for irrigated conditions. The combination of high porosity, low bulk density and presence of crop residue on soil surface decreased runoff losses, independently of the soil texture class. Smith's modified model better estimated the surface runoff for soil with a high soil water content, and it was considered satisfactory for Southern Brazil runoff estimations. The SCS Curve Number model overestimated the cumulative runoff and its use needs adjustments particularly for no-tillage management system.     

Using midday stem water potential for scheduling deficit irrigation in mid–late maturing peach trees under Mediterranean conditions

Irrigation techniques that reduce water applications are increasingly applied in areas with scarce water resources. In this study, the effect of two regulated deficit irrigation (RDI) strategies on peach [Prunus persica (L.) Batsch cv. “Catherine”] performance was studied over three growing seasons. The experimental site was located in Murcia (SE Spain), a Mediterranean region. Two RDI strategies (restricting water applications at stage II of fruit development and postharvest) based on stem water potential (Ψ_s) thresholds (?1.5 and ?1.8 MPa during fruit growth and ?1.5 and ?2.0 MPa during postharvest) were compared to a fully irrigated control. Soil water content (θ_v), Ψ_s, gas exchange parameters, vegetative growth, crop load, yield and fruit quality were determined. RDI treatments showed significantly lower values of θ_v and Ψ_s than control trees when irrigation water was restricted, causing reductions in stomatal conductance and photosynthesis rates. Vegetative growth was reduced by RDI, as lower shoot lengths and pruning weights were observed under those treatments when compared to control. However, fruit size and yield were unaffected, and fruit quality was slightly improved by RDI. Water savings from 43 to 65 % were achieved depending on the year and the RDI strategy, and no negative carryover effect was detected during the study period. In conclusion, RDI strategies using Ψ_s thresholds for scheduling irrigation in mid–late maturing peach trees under Mediterranean conditions are viable options to save water without compromising yield and even improving fruit quality.     

Quality and maximum profit of industrial tomato as affected by distribution uniformity of drip irrigation system

The tomato industry reformed its system of payment by weight of tomato, introducing a corrective system based on percent level of fruit dry matter produced. Such a decision implies significant changes in the management of irrigation systems, with a need to emphasize the technological quality of the marketable product. Three levels of distribution uniformity of the irrigation system are analysed, and related production functions of crop yield and percent of dry matter are presented as well as their use on the optimisation of dry matter, expected revenues and seasonal applied water. Results are critically influenced by the distribution uniformity. They demonstrate the inter-relationship between crop production, percent fruit dry matter and irrigation management, and the importance of considering non-uniformity in the economic analysis of industrial tomato production. Decreases in uniformity lead to a reduction in dry matter production per unit land. Decreases in dry matter are also observed with increasing levels of seasonally applied water, with the optimal level always lower than the required for maximum yield. Such interaction suggests a continuous and inverse relationship between profit and water applied. However, due to the corrective system of payment, by levels of percent of dry matter produced, for some uniformity, the expected revenue follows the yield-water production function instead of the dry matter function. This fact introduces disturbances in the optimal water applied inducing higher than expected levels of water applied for profit maximisation. The simulated data also show that incentives to switch to new systems or management practices able to raise the distribution uniformity result more from profit losses than increases in water price.     

Resource allocation tradeoffs in Manila’s peri-urban vegetable production systems: An application of multiple objective programming

This paper designed and developed a multi-objective programming (MOP) model to illustrate the dynamic relationship among technologies, productive activities, constraints and farmers’ objectives in the peri-urban vegetable production system and use the model as an economic tool in analysing probable consequences of a given action or innovation on the farm. The best compromise solution was generated using four analytical steps, as follows: single-objective optimization (to determine the ideal and anti-ideal values of the objective functions); constrained optimization (to generate the set of Pareto non-dominated solutions); cluster analysis (to trim down efficient set into smaller homogeneous groups); and compromise programming (to determine where the best compromise solution lies).     

Biomass allocation and foliage heteroblasty in hard pine species respond differentially to reduction in rooting volume

Rooting space is considered as a resource in plants, but comparative studies on the biomass allocation plasticity in response to rooting volume (RV) are rare. We compared responses in growth, biomass allocation and ontogenetic heteroblasty in nine hard pine species of contrasted ecology. Seedlings were cultivated in containers of 0.2, 0.5, 1.0, 2.8 and 7 L for two growing seasons (425 days). Reduction in RV caused a reduction in plant absolute and relative growth rate and biomass allocated to stems but it increased biomass allocated to roots. RV affected to a lesser extent and in a less consistent direction allocation to leaves. Species that grew faster (higher relative growth rate) had a steeper decrease in growth with the reduction in RV. Ontogenetic heteroblasty, evaluated as the proportion of secondary needles in the needle biomass, showed highly different plasticity patterns in response to RV. Decrease in RV caused negligible or no change either in the most ontogenetically delayed Mediterranean pines or in the most ontogenetically advanced pines, the mesic Pinus sylvestris and P. uncinata. By contrast, ontogenetically intermediate species showed steep reaction norms in response to reduction in RV. While P. pinaster and P. brutia showed marked rejuvenation, P. nigra accelerated the development of adult foliage.     

Effect of the Nixtamalization Process on the Dietary Fiber Content,Starch Digestibility,and Antioxidant Capacity of Blue Maize Tortilla

Nixtamalization is an ancient process developed by the Mesoamerican cultures. Initially, volcanic ashes were used and then calcium hydroxide in commercial production, and more recently nixtamalization with calcium salts (NCS) has been proposed. The aim of this study was to evaluate the effect of NCS on carbohydrate digestibility and antioxidant capacity in the elaboration of blue maize tortillas. NCS in blue tortillas showed a high amount of total dietary fiber (14.27 g/100 g), the main fraction being insoluble dietary fiber. The contents of resistant starch and slowly digestible starch did not change with the nixtamalization process. The predicted glycemic index value was lower in blue tortillas with the NCS process (58) than with the traditional nixtamalization process (71). In general, NCS in blue tortillas presented a higher antioxidant capacity than traditional tortillas (ferric reducing antioxidant power method), indicating that phenolics present in blue maize maintain their activity after cooking. It can be concluded that the nutraceutical features (high dietary fiber content and antioxidant capacity) of blue maize tortillas are enhanced when they are elaborated with the NCS process.     

self-(in)compatibility almond genotypes: A review

To compile self-(in)compatibility almond genotypes, a review of 133 commercial cultivars of wide geographical origin was made. The information gathered from own and mainly published work will be useful for both grower's cultivar choice when planting and for breeder's cross design when planning. The almond S genotypes compiled were identified using five different methods: biological (pollination tests in the field and in the laboratory) and molecular (RNases, PCR and sequencing). In most cases, genotypes were assigned after combining more than one technique. Cultivars were classified into three categories: self-incompatible (99), self-compatible (16) and doubtful self-incompatible (18). The database is divided in 9 fields (name, origin, parentage, obtention year (crossing, selection or release), S genotype, technique used, reference, consensus genotype, and cross incompatibility group). A study of the 27 S alleles already identified and their geographical distribution within the cultivated almond is also presented. The study was divided into cultivars of known and unknown parentage and the distribution of S alleles frequencies was uneven among the 133 cultivars. S allele frequencies are related to geographical origin. Some alleles (S ₁, S ₅, S ₇ and S ₈) are more frequently observed than the others among cultivars of both known and unknown parentage. In the cultivated almond, the S f allele is only found in the Puglia region, Italy. The S _f frequency is three times higher in cultivars released from breeding programmes than in cultivars selected by growers. From the 351 resulting possible genotypes by combination of the 27 S alleles identified only 20 CIG (0-XIX) have been established, which represents a small fraction of the whole genetic diversity of this polymorphic gene in almond.     

Biplot analysis of trait relations of white lupin in Spain

A 2-year study of autumn-sown white lupin (Lupinus albus L.) was conducted under rainfed Mediterranean conditions in southern Spain. 108 landraces were evaluated for yield and major phonological and plant structural characteristics. Path coefficient and Genotype-Trait (GT) biplot analysis were used. Applying both types of analyses to the multiple trait data revealed that GT biplot graphically displayed the interrelationships among traits and facilitated visual comparison of accessions and selection. Wide variation was observed for trait phenology (dates of flowering and maturity), plant structure (plant and first order inflorescence height) and yield characters (first order branches, first order inflorescence and total yield). It was found that the accessions with the highest yields were the tallest and the latest to flower, both on the mainstem and on the lowest first order branch, and also were the latest to mature. GT biplots also had suggested as the accessions have been displayed according to their origins. The results showed that foreign germplasm may be an important material for improving some yield components such as number of pods and seeds per plant of locally adapted lupins in Spain. This revised version was published online in July 2006 with corrections to the Cover Date.     

Genetics of resistance to bean golden mosaic virus in Phaseolus vulgaris L.

Summary The genetics of resistance to bean golden mosaic virus (BGMV) was studied in an 8×8 complete diallel cross of common bean, Phaseolus vulgaris L. The 28F₁ hybrids, their reciprocals, and eight parents were artificially inoculated with BGMV under glasshouse conditions. Data were recorded and analyzed for foliar yellowing, plant dwarfing, flower abortion, and pod formation, using a randomized complete block design with two replications.General combining ability (GCA) mean squares were highly significant (P<0.01) and larger than values for specific combining ability for all traits. Reciprocal and maternal effects were nonsignificant. Cultivars Royal Red and Alubia Cerrillos possessed significant negative and positive GCA for all traits, respectively. Porrillo Sintetico also had negative GCA for all traits except plant dwarfing. None of the GCA effects were significant for Great Northern 31 and PVA 1111. Positive associations existed among all traits studied.     

Effect of industrial dehydration on the soluble carbohydrates and dietary fiber fractions in legumes

The effects of soaking, cooking, and industrial dehydration treatments on soluble carbohydrates, including raffinose family oligosaccharides (RFOs), and also on total dietary fiber (TDF), insoluble dietary fiber (IDF), and soluble (SDF) dietary fiber fractions were studied in legumes (lentil and chickpea). Ciceritol and stachyose were the main alpha-galactosides for chickpea and lentil, respectively. The processing involved a drastic reduction of soluble carbohydrates of these legumes, 85% in the case of lentil and 57% in the case of chickpea. The processed legume flours presented low residual levels of alpha-galactosides, which are advisable for people with digestive problems. Processing of legumes involved changes in dietary fiber fractions. A general increase of IDF (27-36%) due to the increase of glucose and Klason lignin was observed. However, a different behavior of SDF was exhibited during thermal dehydration, this fraction increasing in the case of chickpea (32%) and decreasing in the case of lentil (27%). This is probably caused by the different structures and compositions of the cell wall networks of the legumes.